FORTINET PENETRATION TESTERS SIMULATE NSE8_812 ACCURATE STUDY MATERIAL

Fortinet Penetration testers simulate NSE8_812 Accurate Study Material

Fortinet Penetration testers simulate NSE8_812 Accurate Study Material

Blog Article

Tags: Accurate NSE8_812 Study Material, NSE8_812 Training Materials, NSE8_812 Accurate Prep Material, New NSE8_812 Exam Price, NSE8_812 Free Download Pdf

In order to facilitate the wide variety of users' needs the NSE8_812 study guide have developed three models with the highest application rate in the present - PDF, software and online. No matter you are a student, a office staff or even a housewife, you can always find your most situable way to study our NSE8_812 Exam Q&A. Generally speaking, these three versions of our NSE8_812 learning guide can support study on paper, computer and all kinds of eletronic devices. They are quite convenient.

One of the benefits of achieving the Fortinet NSE8_812 Certification is that it can help you stand out in a competitive job market. By earning this certification, you'll be able to demonstrate that you have the skills and expertise needed to help organizations secure their networks and protect against advanced threats. This can make you a more attractive candidate for roles such as network security engineer, security analyst, and security operations center (SOC) analyst.

Fortinet NSE8_812 exam is a vital certification test for IT professionals who want to demonstrate advanced knowledge and skills in network security. Fortinet NSE 8 - Written Exam (NSE8_812) certification shows that the holder has a comprehensive understanding of Fortinet's security services and solutions and can support complex networks while ensuring security at all levels. By earning this certification, candidates can advance their career potential and potentially earn a higher salary, making the exam worth considering for those interested in network security.

>> Accurate NSE8_812 Study Material <<

Fortinet NSE8_812 Training Materials & NSE8_812 Accurate Prep Material

Our Fortinet NSE8_812 training materials are compiled by professional experts. All the necessary points have been mentioned in our Fortinet NSE 8 - Written Exam (NSE8_812) NSE8_812 practice engine particularly. About some tough questions or important points, they left notes under them. Besides, our experts will concern about changes happened in Fortinet NSE 8 - Written Exam (NSE8_812) NSE8_812 study prep all the time.

Fortinet NSE 8 - Written Exam (NSE8_812) Sample Questions (Q15-Q20):

NEW QUESTION # 15
Refer to the exhibits.
Exhibit A

Exhibit B

Exhibit C

A customer is trying to set up a VPN with a FortiGate, but they do not have a backup of the configuration.
Output during a troubleshooting session is shown in the exhibits A and B and a baseline VPN configuration is shown in Exhibit C Referring to the exhibits, which configuration will restore VPN connectivity?

  • A.
  • B.
  • C.
  • D.

Answer: C

Explanation:
The output in Exhibit A shows that the VPN tunnel is not established because the peer IP address is incorrect.
The output in Exhibit B shows that the peer IP address is 192.168.1.100, but the baseline VPN configuration in Exhibit C shows that the peer IP address should be 192.168.1.101.
To restore VPN connectivity, you need to change the peer IP address in the VPN tunnel configuration to
192.168.1.101. The correct configuration is shown below:
config vpn ipsec phase1-interface
edit "wan"
set peer-ip 192.168.1.101
set peer-id 192.168.1.101
set dhgrp 1
set auth-mode psk
set psk SECRET_PSK
next
end
Option A is incorrect because it does not change the peer IP address. Option B is incorrect because it changes the peer IP address to 192.168.1.100, which is the incorrect IP address. Option D is incorrect because it does not include the necessary configuration for the VPN tunnel.


NEW QUESTION # 16
Refer to the exhibit that shows VPN debugging output.

The VPN tunnel between headquarters and the branch office is not being established.
What is causing the problem?

  • A. The Phase-1 encryption algorithms are not matching.
  • B. There is a mismatch in the ISAKMP SA lifetime.
  • C. There is no matching Diffie-Hellman Group.
  • D. HQ is using IKE v1 and the branch office is using with IKE v2.

Answer: A


NEW QUESTION # 17
An HA topology is using the following configuration:

Based on this configuration, how long will it take for a failover to be detected by the secondary cluster member?

  • A. 600ms
  • B. 300ms
  • C. 200ms
  • D. 100ms

Answer: A

Explanation:
https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/489324/failover-protection


NEW QUESTION # 18
Refer to the exhibits.

You must integrate a FortiMail and FortiSandbox Enhanced Cloud solution for a customer who is concerned about the e-mails being delayed for too long.
According to the configuration shown in the exhibits, which would be an expected behavior?

  • A. FortiMail will not wait for results but only for attachments that have been already submitted to the FortiSandbox in the last 60 minutes.
  • B. FortiMail will relay valid e-mails to the mail server as soon as it is done with other local inspections.
  • C. If an attachment is sent to the FortiSandbox while the job queue is full, the e-mail might be delayed for up to 30 minutes, then e-mail will be relayed to the mail server.
  • D. FortiMail will ignore the timeout value if content disarm and reconstruction (CDR) is enabled.

Answer: B


NEW QUESTION # 19
Refer to the exhibits.


A customer is looking for a solution to authenticate the clients connected to a hardware switch interface of a FortiGate 400E.
Referring to the exhibits, which two conditions allow authentication to the client devices before assigning an IP address? (Choose two.)

  • A. FortiGate devices with NP6 and hardware switch interfaces cannot support 802.1X authentication.
  • B. Devices connected directly to ports 3 and 4 can perform 802 1X authentication.
  • C. Ports 3 and 4 can be part of different switch interfaces.
  • D. Client devices must have 802 1X authentication enabled

Answer: B,D

Explanation:
The customer wants to deploy a solution to authenticate the clients connected to a hardware switch interface of a FortiGate 400E device. A hardware switch interface is an interface that combines multiple physical interfaces into one logical interface, allowing them to act as a singleswitch with one IP address and one set of security policies. The customer wants to use 802.1X authentication for this solution, which is a standard protocol for port-based network access control (PNAC) that authenticates clients based on their credentials before granting them access to network resources. One condition that allows authentication to the client devices before assigning an IP address is that devices connected directly to ports 3 and 4 can perform 802.1X authentication. This is because ports 3 and 4 are part of the hardware switch interface named "lan", which has an IP address of 10.10.10.254/24 and an inbound SSL inspection profile named "ssl-inspection". The inbound SSL inspection profile enables the FortiGate device to intercept and inspect SSL/TLS traffic from clients before forwarding it to servers, which allows it to apply security policies and features such as antivirus, web filtering, application control, etc. However, before performing SSL inspection, the FortiGate device needs to authenticate the clients using 802.1X authentication, which requires the clients to send their credentials (such as username and password) to the FortiGate device over a secure EAP (Extensible Authentication Protocol) channel. The FortiGate device then verifies the credentials with an authentication server (such as RADIUS or LDAP) and grants or denies access to the clients based on the authentication result. Therefore, devices connected directly to ports 3 and 4 can perform 802.1X authentication before assigning an IP address.
Another condition that allows authentication to the client devices before assigning an IP address is that client devices must have 802.1X authentication enabled. This is because 802.1X authentication is a mutual process that requires both the client devices and the FortiGate device to support and enable it. The client devices must have 802.1X authentication enabled in their network settings, which allows them to initiate the authentication process when they connect to the hardware switch interface of the FortiGate device. The client devices must also have an 802.1X supplicant software installed, which is a program that runs on the client devices and handles the communication with the FortiGate device using EAP messages. The client devices must also have a trusted certificate installed, which is used to verify the identity of the FortiGate device and establish a secure EAP channel. Therefore, client devices must have 802.1X authentication enabled before assigning an IP address. References: https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/19662/hardware- switch-interfaceshttps://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/19662/802-1x- authentication
https://docs.fortinet.com/document/fortigate/7.2.0/new-features/959502/support-802-1x-on-virtual-switch-for- certain-np6-platforms


NEW QUESTION # 20
......

To further strengthen your preparation for the Fortinet NSE8_812 exam, ValidBraindumps provides an online Fortinet Practice Test engine. With this interactive tool, you can practice the NSE8_812 Exam questions in a simulated exam environment. The NSE8_812 online practice test engine is designed based on the real Fortinet NSE8_812 Exam patterns, allowing you to familiarize yourself with the format and gain confidence for the actual Fortinet NSE8_812 exam. Practicing with the Fortinet NSE8_812 exam questions will not only increase your understanding but also boost your overall performance.

NSE8_812 Training Materials: https://www.validbraindumps.com/NSE8_812-exam-prep.html

Report this page